How to reset canon MP287 MP287 with Service Tool

How to reset canon MP287 MP287 with Service Tool
 
Printer Canon is one of the best selling printer used by users around the world. in addition to its use very easy. also means hardware or software installation is very easy. canon printer therefore most preferred by consumers. but sometimes common indicator lights blink on that cause its use to be an obstacle to continue the work. this time I will help you how to reset canon MP287 MP287 with Service Tool

How:  

1. First download the software HERE  
2. Create a Canon MP287 printer in a state of SERVICE MODE   
3. Turn off by pressing the Canon MP287 power. Do not unplug the power cord
   - Press and Hold the STOP / RESET followed by pressing the POWER button. both buttons  depressed position.
   - Remove the STOP / RESET but do not release the button POWER.
        - Press the STOP / RESET 6 times.
        - Remove the two buttons simultaneously. 
4. Control Panel (LCD Panel) will MP287 blank / dark and your PC will detect New Hardware. Just Ignore 
5. Give plain paper in the printer
6.  Then you use the software downloaded earlier.
       - Click on the tab MAIN Clear Ink Counter (there will be a process of printing a page with the words "D  = 000.0")
        - Click on the tab EEPROM Clear Operation
        - Click on the tab EEPROM Print (to print the results MP258 Resetter.
           One line in writing as follows: "TPage (TTL = 00 000 COPY = 00000)" 
7. Turn off the printer by pressing the power on. 
8. Then turn it on again
9. On the printer screen, if showed the number 1, it worked. and try to print a test
10.  If not, then repeat again until it can be 
11. Completed.